HP Deskjet 3054 wireless setup

HP DeskJet 3054 is an all-in-one printer that allows the users to print, scan, and copy the document. For using the printer services, a user needs to complete the HP DeskJet 3054 Wireless Setup on your device. Setting up the printer is not a difficult task, all you need to follow the guidelines carefully to complete the process. In this post, we are going to share the simple step by step guidelines that can help you with the HP Deskjet 3054 wireless setup for Mac devices. So, read pon and follow the simple steps to complete the task.

HP DeskJet Wireless Setup Mac: Connect HP DeskJet 3054 to WiFi

To start with the HP Deskjet 3054 wireless setup,  you need to collect the network details like network name and password. Once you have all the information, you can begin the setup process by following the simple guidelines mentioned below:

  • Turn on your HP printer computer and router.HP Deskjet 3054 wireless setup
  •  It is important for you to know the network name (SSID). Here, the SSID stands for the service set identifier also known as the network name.
  •  After this, gather  WEP or WPA key ( the network password).
  •  Make sure that your computer is connected to the Wi-Fi network and you have active internet access.
  •  Take and make sure that your printer is connected to the computer and present it on the same network.
  •  Check if your printer, computer, and router are turned on.
  • Place your printer closer to the computer to connect HP DeskJet 3054 to WiFi network.
  • Place your computer and printer within the range of your router during the printer setup and installation.
  • Disconnect the Ethernet cable and USB if connected to your printing device.

Connect the Printer to Wireless Network

  •  Connect your printer to Wi-Fi using the wireless setup wizard.
  •  The HP installer will find the printer at the time of installation.
  •  Go to the control panel and open the ‘Dashboard’.
  • Click on the ‘Wireless’ icon.
  • Choose the Setup.
  • Go to the ‘Network Setup’ and then ‘Wireless Settings’.
  • Choose the ‘Wireless Setup Wizard’.
  • After this,  choose your Wi-Fi network name from the list of available networks. Hit the Ok button for confirmation.
  •  If the list is not displaying your network name, you need to choose ‘Enter New Network Name’,.
  • Follow the on-screen guidelines to enter the network WEP, WPA key.
  • Hit the Done button.

Once you are done with the HP Deskjet 3054 Wireless setup Mac,  you need to install the latest printer software and driver available for your device.  To download the drivers, you can visit the HP official website and get them from there. Once you are done with the entire process, print the test page to make sure that everything is working fine.

We hope that after following these simple guidelines you would be able to Connect HP DeskJet 3054 to WiFi.  The mentioned steps are very simple and easy to follow, but, if you still have a doubt or there is any other query regarding the setup process, you can always contact the experts and take their advice.  The professionals can suggest the best possible solution to your problem and make sure that nothing compromises your printing experience.